Read the many endorsements this
book has received in Industrial Magazines
EDM Today
Finally, there is a comprehensive, well written, fully illustrated book,
that takes all the mystery out of the most popular Non-traditional Machining
Processes, and brings the reader up to date….
Very few of us, even those that try to stay abreast of new technology,
understand the current state-of-the-art of all the popular Non-Traditional
Machining Processes. The reason for that is, there was never a single source
publication that contained all that information in a logical, easy-to-understand
format.
That has all been changed, since the publishing of Carl Sommer’s latest book,
The Non-Traditional Machining Handbook!
Now everyone can become knowledgeable as to what these processes are capable of,
how they work, and the advantages they offer over the more traditional machining
technologies.
Editor’s Note:
In my opinion, “The Non-Traditional Machining Handbook”
contains so much valuable information about new machining technologies, that no
business or individual involved in industrial manufacturing can afford to be
without it. The knowledge gained by
reading this book NOW, can be priceless to an individual or a shop.
If only such a book existed about the EDM process when it was first
introduced, manufacturing would be much further advanced today.
We congratulate Carl Sommer, for sharing his comprehensive view of what
will be tomorrow’s “Traditional Machining Technologies”—Today!
EDM Today, Nov./Dec. 1999 (Jack Sebzda, Editor In Chief)
Tooling @ Production Magazine
A fresh look at nontraditional machining Metalcutting
‘Renaissance Man’ creates handbook on EDMing, other techniques. If
anyone qualifies as a Renaissance Man in manufacturing, it’s Carl
Sommer. He’s a veteran machinist, the owner and president of
Reliable EDM Inc in Houston, TX. He’s a longtime educator….This impulse to share knowledge was
the driving force behind Mr Sommer’s latest publishing effort, the
Non-traditional Machining Handbook.
Joseph F. McKenna, Editor of Tooling & Production Nov. 99, Cover
Story
Southwest Machinery &Industrial News
“After years of research and countless hours
of writing and preparation, the Non-Traditional Machining Handbook is finished,”
said Carl Sommer, author. “This book provides an excellent opportunity for those
interested in non-traditional machining to examine the many advantages in using
the non-traditional machining methods….”
The Non-Traditional Machining Handbook takes the reader through each type of
non-traditional machining. The
fundamentals of each process are explained, various applications for the
process, advantages and disadvantages of the process, and how to profit by using
the process.
Southwest Machinery & Industrial News, Dec. 99
American Tool, Die & Stamping
It finally happened!
After years of research and countless hour of writing and preparation, a current
book showing all the non-traditional machining methods has arrived….
Owner and president of Reliable EDM, the largest Wire EDM job shop west
of the Mississippi, he brings to the table a remarkable practical and
instructive book. This book is a
must for anyone interested in non-traditional machining.
American Tool, Die & Stamping, Nov./Dec. 1999
Stamping
Journal
“The new book provides an opportunity for those interested
in non-traditional machining to examine the cost-saving advantages in using the
various machining methods.”
Stamping Journal Jan./Feb. 2000
EDM Technology Transfer
“A practical book showing designers, engineers, and
manufacturers the exciting world of emerging new technologies so they can remain
competitive for the twenty-first century.”
EDM Technology Transfer Web Site
Molding
Systems
"The 432-page Non-Traditional Machining
Handbook by Carl Sommer examines non-traditional machining methods and their
cost-saving advantages." Molding
Systems April 2000
Fabricator
“The new book provides an opportunity for those interested
in nontraditional machining to examine the cost-saving advantages in using the
various machining methods.”
Fabricator Jan. 2000
Moldmaking Technology
“After years of research and
countless hours of writing and preparation, a current book showing all of the
non-traditional machining methods has arrived, which has been reviewed by
experts in each of the various non-traditional machining areas….
“Sommer hopes this
book will help keep America’s businesses abreast of emerging, new technologies
and help them to remain competitive in the 21st
century.”
Moldmaking Technology June
2000
Society of Manufacturing Engineers
This book has been approved and is sold by Society of
Manufacturing Engineers in their Training Tools catalog.
National Tooling & Machining Association
“It finally happened!
After years of research and countless hours of writing and preparation, a
current book showing all the non-traditional machining methods has arrived.
“Unrivaled in its field, this refreshing new book provides an excellent
opportunity for those interested in non-traditional machining to examine the
many cost-saving advantages in using the various machining methods….
“Carl Sommer, author of over 50 books, is uniquely qualified to author this
book. Sommer started in the metal trade in 1949 and has many years
of experience in the machining industry.
Owner and president of Reliable EDM (Houston, TX), the largest Wire EDM shop
west of the Mississippi, be brings to the market a remarkably practical and
instructive book.”
National Tooling & Machining Association Record Jan. 2000
Now you can have the most practical, and informative guide on
non-traditional machining ever published.
Non-Traditional Machining Handbook,
hardcover ISBN:1-57537-325-4, can be purchased from: Advance Publishing, Inc.
for $79.95, plus $5.95 for shipping and handling.
|